发布时间：2021-09-03 14:24:43 发布人：
After the cold air enters the compressed air booster pump, a large amount of water vapor will occur at high temperature when encountering the heat of friction on the back of the pump body, which will increase the burden of steam filtration after the air booster pump, so it is necessary to discharge the water in the post-treatment equipment from time to time.
Compressed air enters the production area through pipelines and is used by users. Some of these pipelines are buried underground and some are exposed in the air. In cold weather, the open pipe may cause some moisture due to low temperature, and some may even have an inevitable impact on the normal utilization of users due to the increase of moisture. For example, in the laser cutting machine industry, if the oil and water content in the compressed air is too high, it will affect the accuracy of the cutting process. In the mining industry, the wet compressed air booster pump may not affect the normal use of pneumatic tools, but will affect the strength of pneumatic tools.
After shutdown in winter, it is necessary to pay attention to vent all gas, sewage and water, and vent the water, gas and oil in various pipelines and gas bags. Because the temperature is high during unit operation in winter, a large amount of condensate will occur after air cooling due to low external temperature after shutdown. It exists in various control pipelines, which is easy to cause hidden dangers such as blockage, expansion and crack of control pipelines.