The main function of the gas booster pump is to conduct secondary pressurization for insufficient compressed air pressure. It is mostly used for insufficient local air pressure in the factory. There is no need to transform the gas pipeline and add a high-pressure air compressor. It has the advantages of economy, safety, explosion-proof and low noise. The following is a brief introduction to the circumstances under which the gas booster pump should be equipped with an air storage tank and how.
If the compressed air pressure of the factory is insufficient, the compressed air booster pump is generally configured, which is simple, practical and efficient. But how to configure the air storage tank of the compressed air booster pump? This depends on the use of compressed air on site. It is generally divided into instantaneous gas consumption, lasting gas consumption, one by one gas consumption, etc.
Instantaneous gas consumption: This is generally used in valve switch, air gun and other fields. It is characterized by long pressurization and gas storage time and large instantaneous consumption. At this time, the compressed air in the tank equipped with the compressed air booster pump should reach the instantaneous consumption required by the equipment. Generally, the tank equipped will not be too small. The size of the air storage tank can be selected according to the instantaneous consumption of the equipment.
Lasting gas consumption: this situation is often seen in gas purging. In this case, the equipment requires stable air pressure output for the air source, and the selection is mostly based on the flow of the air booster pump. The larger the flow of the air booster pump model, the larger the air tank is selected, and the smaller the flow is, the smaller the corresponding air tank is.
One by one air consumption: this kind is often used with cylinders, pneumatic valves, etc. In this case, the compressed air used by the equipment is mostly below consumption and below shutdown. This situation depends on the compressed air consumption of the equipment. If it is small, it can be equipped with small air tanks.
In short, the customer's on-site situation is ever-changing. If you really can't master it well, you can consult feinte's sales engineer and ask the sales engineer to help recommend it.