The principle of booster pump is to use the low pressure of large area piston to generate high hydraulic pressure of small area piston. In the industrial field, it is used for clamping the chuck of machine tools, inflating the accumulator, inflating the high-pressure bottle, and converting the pressure reducing gas into high-pressure gas. Booster pump can be used for any air source with insufficient pressure, whether mechanical or testing device.
It is driven by gas, without electric arc and spark, and is completely used in places with flammable and explosive liquids or gases. No matter what causes the pressure drop of the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and keep the circuit pressure constant. Compressed air, nitrogen, steam and natural gas can be used as the driving gas source of the pump.
Gas liquid booster pump
The gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel shall be selected for the liquid connection part according to different media. The full set of seals of the pump are imported products, thus ensuring the performance of the gas-liquid booster pump.
Air booster pump
The principle of the air booster pump is to use the low air pressure of the large area piston to generate the high hydraulic pressure of the small area piston. The air booster pump is used in the working environment where the pressure of the original air pressure system needs to be increased. It can increase the air pressure of the working system to 2-5 times. Only the compressed air in the working system needs to be used as the air source. The pump is suitable for single air source pressurization. No power supply is required (it can be used in areas requiring explosion protection). Within the pressure range of the pump, adjust the regulating valve to adjust the inlet pressure, and the output hydraulic pressure is accordingly adjusted steplessly.
Chlorine booster pump
The working pressure range of chlorine booster pump is large. Different types of pumps can be selected to obtain different pressure areas, and the input air pressure and output air pressure can be adjusted accordingly. It can reach a high pressure of 90Mpa. The flow range is wide. For all types of pumps, only 0.1Kg air pressure can work smoothly. At this time, small flow can be obtained. After adjusting the intake air volume, different flows can be obtained.
Easy to control, from simple manual control to complete automatic control can meet the requirements. Automatic restart. No matter what causes the pressure drop of the pressure maintaining circuit, it will automatically restart to supplement the leakage pressure and keep the circuit pressure constant. Safe operation, gas driven, no arc and spark, can be used in dangerous places.
This is the end of the basic question about the use principle and three types of booster pump. If you have any questions about this, please come to our website Get in touch!