To keep your gas-liquid booster pump in good working condition, what matters should you pay attention to? I hope you can pay attention to this problem. Here are four key points to explain.
1. Pressure and flow of driving gas of gas-liquid booster pump.
During continuous operation, the driving air pressure used by all gas-liquid booster pumps and power units shall not exceed 0.69 Mpa, and can reach 1.03 Mpa during intermittent operation.
2. Working pressure and flow of gas-liquid booster pump.
The working pressure of all gas-liquid booster pumps and power units shall refer to the pump output pressure and flow when the driving air pressure is 0.48Mpa. If the large output pressure of the pump is greater than the required working pressure, safety measures should be taken to avoid accidents.
3. Delivery liquid medium of gas-liquid booster pump.
The liquid medium delivered by the gas-liquid booster pump is a key part of the selection. The material of the hydraulic part and the hydraulic seal ring are determined by the liquid medium conveyed. The gas-liquid booster pump can use oil, water and most liquid media. The main hydraulic sealing rings of the standard pump are polybutadiene rubber and polyurethane, and the one-way valve seat is sealed with Teflon. Other sealing materials include fluorocarbon and ethylidene propylene, which are mainly used for special media. Compared with other gas-liquid booster pumps, Jiurong gas-liquid booster pump can complete the same work, but it has fewer parts and seals and is easier to maintain.
4. Volume and weight of gas-liquid booster pump.
For some applications, the overall dimensions and weight of pumps and power units should also be considered.
How to keep the gas-liquid booster pump in good working condition? The above is the answer to the question. You can take a look at it as a reference. It is recommended that you understand the problem and check and maintain items during use, and pay attention to us Learn more!