万博体育maxbextx苹果|注册|歡迎您

网站公告:

新闻中心

万博体育maxbextx苹果|注册|歡迎您

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:

常见问题

当前位置:首页 - 新闻中心 - 常见问题 - 初次使用万博体育maxbextx的用户

初次使用万博体育maxbextx的用户要避免七个使用问题

发布时间:2022-12-26 15:25:46   发布人:
对于初次使用万博体育maxbextx的用户来说,遇到一些故障问题是很常见的。只要知道了万博体育maxbextx故障的解决办法,解决起来就不难了。下面小编整理了七个方面的故障问题了解。
For users who first use gas-liquid booster pump, it is very common to encounter some problems. As long as we know the solution to the fault of the gas-liquid booster pump, it is not difficult to solve it. The following sections summarize the seven aspects of the problem.
故障一:万博体育maxbextx工作频率过低。
Fault 1: The working frequency of the gas-liquid booster pump is too low.
解决方案:万博体育maxbextx管路配置或接口较小,适当加大管路中的气元件或气管管径。
Solution: The pipeline configuration or interface of the gas-liquid booster pump is small, and the diameter of the gas element or gas pipe in the pipeline should be appropriately increased.
故障二:万博体育maxbextx导向阻力过大。
Fault 2: The guide resistance of the gas-liquid booster pump is too large.
解决方案:重新调整万博体育maxbextx机台安装的垂直度。
Solution: readjust the verticality of the installation of the gas-liquid booster pump.
故障三:万博体育maxbextx提升力不够。
Fault 3: The lifting force of the gas-liquid booster pump is not enough.
解决方案:认真核算万博体育maxbextx提升力重新订购气液增压缸产品
Solution: Carefully check the lifting force of the gas-liquid booster pump and reorder the gas-liquid booster cylinder
故障四:万博体育maxbextx预压行程未走到位。
Fault 4: The preloading stroke of the gas-liquid booster pump is not in place.
解决方案:降低万博体育maxbextx模具高度。
Solution: reduce the mold height of gas-liquid booster pump.
万博体育maxbextx
故障五:万博体育maxbextx出现提前增压。
Fault 5: The gas-liquid booster pump is pressurized in advance.
解决方案:重新设定万博体育maxbextx动作时间。
Solution: reset the action time of gas-liquid booster pump.
故障六:万博体育maxbextx模具弹簧力大于预压力。
Fault 6: The spring force of the gas-liquid booster pump mold is greater than the pre pressure.
解决方案:更换万博体育maxbextx上的气液增压缸,加长增压行程。
Solution: Replace the gas-liquid booster cylinder on the gas-liquid booster pump to extend the booster stroke.
故障七:万博体育maxbextx工作频率过快。
Fault 7: The working frequency of the gas-liquid booster pump is too fast.
解决方案:将万博体育maxbextx工作频率控制在额定范围内。
Solution: Control the working frequency of gas-liquid booster pump within the rated range.
所以说初次使用万博体育maxbextx的用户要避免七个使用问题,当然平日里使用记得及时对其进行维护保养。更多相关内容就来我们网站进行咨询!
Therefore, users who use the gas-liquid booster pump for the first time should avoid seven problems. Of course, remember to maintain it in time when using it in ordinary days. More relevant content will come to our website Consult!
新闻推荐:
进行万博体育maxbextx保护和运用的进程事项 2023-02-03
简述安装高压万博体育maxbextx苹果的六大步骤 2023-02-02
当我们给万博体育maxbextx排障时要怎么做 2023-01-10
连续运行万博体育maxbextx有无影响要看实际而定 2023-01-06
万博体育maxbextx苹果使用方法也比较简单 2022-12-31
降低增压泵系统的温度的措施 2022-12-31
初次使用万博体育maxbextx的用户要避免七个使... 2022-12-26
选购万博体育maxbextx苹果时建议从7个方面入手 2022-12-21
万博体育maxbextx的安装需多加了解一些要点 2022-12-14
关于万博体育maxbextx苹果的挑选和运用 2022-12-05

13188935873

qq